The P2000T exposes SLOT1 and SLOT2 for interfacing. The pages as shown below discuss a series of different homebrewn cartridge designs.
The simple cartridge is the most simple design and a great place to start to learn how cartridge interfacing on the P2000T works. The basic cartridge exposes 16kb of ROM to the P2000T. It is explained how to design such a cartridge, how it interfaces with the P2000T and how a simple program is executed from the cartridge.
The biggest drawback of the basic cartridge is that it only exposes 16kb of memory of the ROM. Most parallel ROM chips have at least a capacity of 128kb and one would like to make good use of this. The multicartridge offers a simple ROM selection circuit to allow the user to select which 16kb ROM bank they want to expose to the P2000T, allowing one to bundle multiple applications on a single cartridge. Furthermore, some applications can make use of a so-called "soft-reset" feature. The multicartridge uses a 74HC123 multivibrator to give a well-defined soft-reset signal.
The multicartridge has a single parallel ROM chip fixed to the PCB, but this does not offer easy access when one wants to change the content of this chip. Especially in the scenario that one is developing new software for the P2000T and want to test the program on the original hardware, one would like some means of easy access. The ZIF cartridge is very much identical to the multicartridge, but has a ZIF socket on its back side for easy swapping of ROMS.
This project is a cost-reduced version of the Multicartridge, meant for hobbyist who would like to build their own cartridge and are comfortable using a soldering iron. The cartridge is designed such that the majority of the components can already be assembled by the PCB manufacturer (e.g. using a so-called assembly service). The user only needs to solder in three more through-hole components and the cartridge is ready to use.